-40%

2/4-Stroke 3.5 / 6.5 / 18.0HP Outboard Motor Fishing Boat Engine Water Cooling

$ 126.19

Availability: 60 in stock

Description

Store category
Sign Up Now !
You may also like
2/4-Stroke 3.5 / 6.5 / 18.0HP Outboard Motor Fishing Boat Engine Water Cooling
Product Description
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1,start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About certification:
We can
only provide CE certification
, there is no other certification can be provided,thanks for your understanding.
Announcements
After in the sea water or turbid water cruising
1. Use the fresh water cleaning the outboard motor
2. With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3. Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,
from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5. Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL ONE: 3.5HP & 2-Stroke,Water-cooling System(1)
SKU

OT-028
Two strokes 3.5 hp and 3.6 hp
are controlled by the handle
, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don't supply wearing parts (pull starter)for free.
If you want buy one please click:
Description:

Overall length:92CM

Overall widteh:36.5cm

Overall height:22cm

Transom height:42cm

Full throttle perating range:4000-5000r/min

MAX SPEED

4000~5000rpm

Maximum output:2.5kw(3.5HP)

Speed:10km/h

Type:2-stroke

Short shaft

40cm

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 35:1

Please be suject to this version, and disregard the manual about this point


Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.

Announcements:

After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL Two: 3.5HP & 2-Stroke,Water-cooling System(2)
SKU: OT-ML-279
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
Please Notice:
STRICTLY FOR PROFESSIONAL USE ONLY
What you will receive is our new version of this boat engine
The trademark will be Yadao instead of Speeda.

Short Shaft:4 0cm

Overall length: 92CM

Overall widteh: 36.5cm

Overall height: 22cm

Transom height: 42cm

Full throttle perating range: 4000-5000r/min

Maximum output: 2.5kw(3.5HP)

Speed: 12km/h(four people)

Type: 2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start]

Propeller mark: 7-1/45-A(inch)

The engine and the propeller ratio: 2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 35:1

Please be suject to this version, and disregard the manual about this point


Gear ratio: 27/13

When at normal cruising,the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture. Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.
Announcements:
After in the sea water or turbid water cruising
1. Use the fresh water cleaning the outboard motor
2. With the moderate velocity circulating the engine, cool off the water chanel with fresh water.
3. Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5. Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL Three: 6.5HP & 4-Stroke,Water-cooling System
OT-ML-282
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
The
Hangkai 6.5 hp 4-stroke
provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport! With all of this available at a competitive price, it is no wonder this little outboard receives so much attention and praise!

Brand: HANGKAI

Displacement: 123CC

Gear ratio: 2.08(27:13)

Cylinder: 1

Max.Output(kw): 4.8

Max.speed(r/min): 5000-6000

Gear Positions: F-N-R

Packing size: 114x64x41cm

Ignition System: CDI

Cooling System: Water-cooling

Short shaft

40cm

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.(kgs): 26/31.2

Bore x Stroke(mm): 59x45

Recommended Propeller range: 3 -7"x9"

Recommended Lubricant: Four Stroke Lubricating oil

Mixing ratio: Pure gasoline

Trim and tilt system: Manual Tilt

Overall LxWxH(cm): 78.3x34.3x103.9

Standard fueel tank capacity: 12L

Optional fuel tand capacity: /

Bonus accessories:

brochures, tubing, cotter pins

Pump impeller, start rope, start key

12 liter fuel tank, tool kit, spark plug, cylinder head pad
MODEL Four: 3.6HP & 2-Stroke,Water-cooling System
SKU: OT-ML-132---(3.6HP 2-Stroke)
Two strokes
3.5 hp and 3.6 hp
are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
Short Shaft: 40cm
STRICTLY FOR PROFESSIONAL USE ONLY
1. Start-In-Gear protection/clutch feature prohibits prop rotation while idling.·
2. Lift/Tilt feature for shallow water operation and convenience.
3. Features 360 degree steering rotation for reverse without gear shifting.
4. Superior engine water cooling system for improved engine performance.
5. Easy pull off engine cover with push button latch for instant motor access.
Specification:
1)Max. Output: 2.6kw /3.6HP
2)Full throttle operating range (rpm): 4000-5000
3)Stroke: 2
4)Cylinder:1
5)Displacement (ml): 55CC
6)Bore×Stroke (mm): 44×33
7)Dimensions (L×W× H) mm: 365×220x920
8)Transom height:42cm
9)Starting system: Manual
10)Control system: manual tilt
11)Gear shift position: Clutch control
12)Gear ratio:2.08(27:13)
13)Propeller options: 3-7¼ "x 5"
14) Recommended Fuel: # 93 Lead-free gasoline
15)Recommended Gear Oil: Professional Gear Oil
16) Mixed Rating: Fuel : Oil (30/50:1)
17) Cold style: Water-cooled
18)Engine Position:Outboard
Features:

360 degree steering rotation for reverse without gear shifting .

Start-In-Gear protection/clutch feature prohibits prop rotation while idling .

Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant motor access. Standard CDI ignition system for easy starting and improved performance. Vertical mount engine design for increased power, performance and durability. Superior carbonation system with primer bulb for increased efficiency.

Twist grip throttle handle and engine stop button for improved response .

Superior outboard anti corrosion system and anodes for increased durability .

Durable cast aluminum construction for superior corrosion protection .

Through the prop exhaust outlet for decreased noise and pollutant .

Heavy duty lightweight aluminum cast propeller is standard equipment

Shipping Weight: 21.4 pounds
MODEL Five: 6HP & 2-Stroke,Water-cooling System
SKU: OT-C001-073
STRICTLY FOR PROFESSIONAL USE ONLY
Technical Parameters:
Short Shaft:40cm
Dimension:
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)
Performance:

Full throttle operating range 5000-6000r/min

Maximum output 4.4KW/6HP

Idling speed ( in neutral) 1000±100 r/min

Engine

Gear positions Forward-neutral-reverse

Gear ratio 2.15(28/13)

Trim and tilt system: Manual tilt

Drive unit

Recommended fuel Regular unleaded gasoline

Integral fuel tank capacity 2.5L

Recommended engine oil 2-stroke outboard motor oil

Engine oil type Genuine or recommended 2str engine oil

Lubrication System Engine oil mixed gasoline

Engine oil mixing ratio Fuel 50: Engine oil 1

Gear oil quantity 195ml(6.6 fl.oz.)

Tightening torque for engine

Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)

Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
MODEL SIX:3.5HP & 2-Stroke Outboard Motor (3)
OT-MLLCR-567
Description:

Overall length:92CM

Overall wideth:36.5cm

Overall height:22c
m

Transom height:42cm

Short Shaft:40cm

Full throttle perating range:4000-5000r/min

Maximum output:2.5kw(3.5HP)

Speed:10km/h

Type:2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 25:1

Please be suject to this version, and disregard the manual about this point


Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL SEVEN: 18HP & 2-Stroke Outboard Motor
OT-MLLCR-1550
■ Brand: HANGKAI
■ Displacement: 246CC
■ Short shaft

40cm
■ Gear ratio: 2.08(27:13)
■ Cylinder: 2
■ Max.Output(kw): 13.2
■ Max.speed(r/min): 5000-6000
■ Gear Positions: F-N-R
■ Packing size: 133x71x38.5cm
■ Ignition System: CDI
■ Cooling System: Water-cooling
■ Control System: Tiller control
■ Starting System: Manual start
■ Control System: #93 gasoline
■ N.W./G.W.(kgs): 38.6/49.5
■ Bore x Stroke(mm): 56x50
■ Recommended Propeller range: 3 -9"1/4''x8"
■ Recommended Lubricant: 2 Stroke Lubricating oil
■ Mixing ratio: Fuel:oil=50:1
■ Trim and tilt system: Manual Tilt
■ Overall LxWxH(cm): 78.3x33.2x105.3
■ Standard fuel tank capacity: 24L
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Don't do the following will avoid cylinder Scoring: 1,start the motor on bank 2, use the motor when it stop coming out of water Even if you want test the motor, it should be done in the river! Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!! About certification: We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
On Jul-04-21 at 21:13:07 PDT, seller added the following information: