MICR Check Setup Gauge for Cut Checks, E-13B & CMC-7 Check Position Gauge

Description

MICR Check Setup Gauge, E-13B & CMC-7 Check Position Gauge for Cut Checks
Quickly and accurately verify everything checks out in display and position with that outstanding MICR Gauge.
Covers USA and Canada standards : ANSI X9.100-160-1-2009 and CPA600. E-13B & CMC-7.
Extra thick 180 microns polyester film (regular overhead transparencies are 100 microns only). Dimension stable plastic back will not curl with hygrometry like cardboard.
Complete and clear usage manual written in everyday English provided with each gauge
Condition is New. Shipped with USPS First Class Package.
This
MICR E13 B
measurement and layout gauge lets you slide in your check and see right away if it complies. Quickly and accurately measure :
Minimum and maximum form width and length
Optical clear band Character spacing (horizontal and vertical)
Character and line skew Character size and stroke width
Clear band area and encoding strip area
Field position within the clear band area
Fields placement for MICR readers
Measurements in inches and millimeters
This
MICR E13B Position Gauge
targets the most recent standards : ANSI X9.100-160-1-2009 and CPA600. This precision tool lets you immediately spot what needs nudging or improvement with MICR printing.
Precise placement and spacing of characters is essential to get reliable results with check processing.
Full instructions are provided to get the best result
.
Making sure that a check meets banking standards is a required step when designing and printing MICR.
This is the best desktop test equipment for MICR.
The MICR E13B Gauge will provide absolute certainty that everything checks out before going to production.
Today's check processing is far more demanding than in the past. Banks now outright reject checks which are not within specifications, and often add rejection fees. Avoid these incidents by making sure your checks comply with ABA standards, U.S Check 21 Act and Canadian CPA006. 2020 Edition.