MICR Check Setup Gauge Ruler, E-13B & CMC-7 Check Position Gauge

Description

Exclusive MICR check position gauge Ruler for both check sheets and rolls, as well as cut checks.
Use it simply like any ruler.
Lay it over the check.
Verify cut checks or continuous forms : rolls or 3 per page.
Keep it to last: durable, extra thick 180 microns acetate film.
Cover all standards: US ANSI X9.100-160-1-2009, Canadian CPA600. and ISO 1004-1:2013 E-13B & CMC-7
Condition is New. Shipped with USPS First Class Package.
Other MICR Check Position Gauges are only for cut checks. This MICR measurement and layout gauge is a clear 180 microns extra thick film overlay suitable to verify individual checks as well as sheets or rolls of uncut forms.
Quickly and accurately measure
:
Minimum and maximum form width and length
Optical clear band
Character spacing (horizontal and vertical)
Character and line skew
Character size and stroke width
Clear band area and encoding strip area
Field position within the clear band area
Fields placement for MICR readers
Measurements in inches and millimeters
Check size standards
This MICR E13B Position Gauge targets the
most recent standards
: ANSI X9.100-160-1-2009 and CPA600. Plus measurement of 3 skew angles.
This precision tool lets you immediately spot what needs nudging or improvement with MICR printing.
Full instructions are provided to get the best result. Making sure that a check meets banking standards is a required step when designing and printing MICR.
This MICR E13B Gauge will provide
absolute certainty
that everything checks out before going to production.
Today's check processing is far more demanding than in the past. Banks now outright reject checks which are not within specifications, and often add rejection fees. Avoid these incidents by making sure your checks comply with ABA standards, U.S Check 21 Act and Canadian CPA006.